grayhill, inc. ?561 hillgrove avenue ?lagrange, illinois 60525-5997 ?usa ?phone: 708-354-1040 ?fax: 708-354-2820 ?www.gr ayhill.com optical and mechanical encoders optical encoders i-9 .070 (1,78) dia .070 (1,78) dia .360 (9,14) ref. .010 (0,25)/ .025 (0,64) push button travel .236 (5,99) .525 .015 (13,34 0,38) .312 (7,92) .250 .002 (6,35 0,05) dia. .375 .015 (9,53 25,42) .250 (6,35) .219 .003 (5,56 0,08) .390 (9,91) .152 .002 (3,86 0,05) .250 (6,35) .066 .002 (1,68 0,05) .250 (6,35) .250 (6,35) .500 (12,7) .152 .002 (3,86 0,05) .250 (6,35) .500 (12,7) .540 (13,72) 3/8-32 unef-2a thread threads to be within .030 (0,76) of shoulder 6 5 4 3 2 1 grayhill xxxx x-x 62fxx-xx-p connector version stripped version 62fxx-01-xxxc xxxx x-x .390 (9,91) 28 awg cable wires on .050 (1,27) centers dim. xxx .20 (dim. xxx 5,08) (see ordering information for cable length) connector is amp p/n 215083-6 grayhill 6 5 4 3 2 1 .250 (6,35) .320 (8,13) ref .312 (7,92) .375 .015 (9,52 0,38) .250 .005 (6,35 0,13) .525 .015 (13,34 0,38) .100 (2,54) strip- ped and tinned .219 .003 (5,56 0,08) .540 (13,72 .066 .002 (1,68 0,05) .510 .015 (12,95 0,38) 3/8-32 unef-2a thread threads to be within .030 (0,76) of shoulder .010 (0,25)/ .025 (0,64) push- button travel 62fxx-xx-p-l xxxx x-x grayhill 8 7 6 5 4 3 2 1 .460 (11,68) ref .490 (12,45) .448 (11,4) .657 .015 (16,7 0,4) .581 .010 (14,8 0,3) .087(2,21) .293 (7,4) ref 62fxx-xx-xxxc-l xxxx x-x grayhill 8 7 6 5 4 3 2 1 .490 (12,45) .657 .015 (16,7 0,4) .581 .010 (14,8 0,3) .500 (12,7) .391 (10,0) ref features integrated self-lighting system for knob illumination ? million rotational cycles 1/2" package compatible with cmos, ttl and hcmos logic optional integral pushbutton choices of cable length and terminations other customized solutions available unless otherwise specified, standard tolerance is ?010 (0,25). applications global positioning/driver information systems medical equipment cockpit controls mixing boards pin version cable version with on-board lighting system with on-board lighting system dimensions in inches (and millimeters) series 62f 1/2'' package, lighted shaft
optical and mechanical encoders grayhill, inc. ?561 hillgrove avenue ?lagrange, illinois 60525-5997 ?usa ?phone: 708-354-1040 ?fax: 708-354-2820 ?www.gr ayhill.com optical encoders i-10 specifications pushbutton switch ratings rating: 5 vdc , 10 ma, resistive contact resistance: less than 10 ohms (ttl or cmos compatible) pushbutton life: 3 million actuations minimum contact bounce: less than 4 ms at make and less than 10 ms at break actuation force: 500 300 grams pushbutton travel : .010/.025 inch switch ratings coding: 2-bit quadrature coded output operating voltage: 5.0 ?25 vdc v oltage breakdown: 250 vac between m utually insulated parts supply current: 30 ma maximum logic output characterisitics: logic high: 3.8 vdc minimum logic low: 0.8 vdc maximum rotational life: 1,000,000 cycles minimum (one cycle is a rotation through all positions and a full return) minimum sink current : 2.0 ma po wer consumption: 150mw maximum optical rise and fall times: less than 30 ms maximum operating torque: detent: 2.0 1.4 in-oz initially non-detent: less than 1.5 in-oz initially shaft push out force: 45 lbs minimum mounting torque: 15 in-lbs maximum terminal strength: 15 lb s cable pull-out force minimum operating speed: 100 rpm maximum axial shaft play : .010 maximum environmental ratings operating temperature range: -40? to 85? storage temperature range: -55? to 100? relative humidity: 90?5% at 40? for 96 hours vibration resistance: harmonic motion with amplitude of 15g's, within a varied 10 to 2000 hz frequency for 12 hours per mil-std-202, method 204 mechanical shock: test 1: 100g for 6 ms, half sine, 12.3 ft/s; test 2: 100g for 6 ms, sawtooth, 9.7 ft/s materials and finishes code housing: reinforced thermoplastic shaft: aluminum bushing: zinc casting shaft retaining ring: stainless steel detent spring: stainless steel series angle of throw: d etent non-detent 11 = 11.25?or 32 pos. 01 = 11.25?or 32 pos itions 15 = 15?or 24 positions 05 = 15 or 24 positions 18 = 18?or 20 pos. 08 = 18?or 20 pos itions 22 = 22.5?or 16 positions 02 = 22.5 or 16 positions pushbutton option: 01 = w/o pushbutton, 02 = with pushbutton 62f22-01-020s-l led: blank = no led, l = supplied with led termination: s = stripped cable; s-l = stripped cable, led; c = connector; c-l = connector, led; p = pin; p-l = pin, led cable length: 020 = 2.0 inches minimum to 250 = 25.0 inches maximum. provided in increments of 1/2 inch. example 035 = 3.5", 060 = 6.0". * eliminate cable length if ordering pins. (ex: 62a22-02-p) ordering information available from your local grayhill component distributor. for prices and discounts, contact a local sales office, an authorized local distributor, or grayhill. custom materials, styles, colors, and markings are available. control knobs available. printed c ircuit boards: nema grade fr-4 gold over nickel or palladium terminals: brass, tin-plated mounting hardware: one brass, nickel-plated nut and stainless steel lockwasher supplied with each switch. nut is 0.094 inches thick by 0.562 inches across flats rotor: thermoplastic code housing: thermoplastic pushbutton dome: stainless steel dome retaining disk: thermoplastic pushbutton housing: thermoplastic phototransistor: planar silicon npn pushbutton contact: brass, nickel-plated flex cable: 28 awg, stranded/top coated wire, pvc coated on .050 or .100" centers (cabled version) header pins: phospher bronze, tin-plated spacer: abs backplate/strain relief: stainless steel lockwasher: stainless steel light pipe: thermoplastic led housing: thermoplastic options contact grayhill for custom terminations, shaft and bushing configurations, and resolutions. control knobs are also available. indicates logic high; blank indicates logic low. code repeats every 4 positions. c lockwise rotation position output a output b 1 2 3 4 output a output b high low high low position number 1 2 3 4 5 6 circuitry, truth table, and waveform standard quadrature 2-bit code * external pull-up resistors required for operation (2.2k). ** circuit shown with on-board lighting system. versions without on-board lighting ** system do not have led power connections. refer to standard 62a series for circuitry. 5% 200 ? 5% 150 ? r * r * switch pushbutton normally open 2 3 1 4 5 6 7 8 ground ground (led) power +5 v output b output a power +5 v pin # s
|
